Steering Angle

Godspeed Project Steering Angle Kits

Godspeed Project Steering Angle Kits

Are you looking for more steering angle out of your Nissan 240SX? Check out Godspeed Steering Angle kits and adapters for S13 and S14. For instance Godspeed Project’s massive angle kit is a direct fit kit without modification to your stock OEM knuckle component. Additionally this angle kit is one piece made kit, unlike most of the kits that are out there that are cut and welded to the OEM steering knuckle. Furthermore the Godspeed steering angle kits are made by OEM manufacturer.

About Godspeed Steering Angle Kits

Godspeeds massive angle kit will give you additional extreme angle without modifying the front lower control arm. Secondly the massive angle steering kit will stop at exactly 55 degrees, if you change the lower control arm bump stop this angle kit will give you additional five to ten more degrees depending on how you changed your bump stop. In conclusion this steering angle kit is an absolute must for the Nissan 240SX drifters out there!

Anti Bump Steer

Godspeed Project Anti Bump Steer Kits

Godspeed Project Anti Bump Steer Kits

Do you have alignment issues with your lowered Honda S2000? Check out this S2000 anti bump steer kit from Godspeed. When a car is lowered the steering arms have to arc upward to the knuckle. Since front wheel camber changes with suspension motion the steering will work best when the steering arms are near horizontal. Godspeed Project reduces bump steer to nearly non-existent and it also allows a larger range of rear toe adjustment. By minimizing bump steer, the car is more predictable when driving. This Godspeed Anti Bump Steer Kit replaces the rear toe arm in the S2000. This new arm solves many common problems of the S2000’s geometry after lowering ride height.

Tie Rods

Godspeed Project Tie Rods

Godspeed Project Tie Rods

Are you looking for a performance tie rod for your Nissan 240SX? Check out Godspeed Tie Rods we offer for the S13 and S14. The tie rod is part of the steering in a vehicle. A tie rod is a slim structural rod that is used as a tie and useful for carrying tensile loads only. For instance a tie rod has an inner and an outer end. The tie rod transfers force from the steering center link or the rack gear to the steering knuckle. Finally this will make the wheel turn. The outer tie rod end attaches with an adjusting sleeve, that allows the length of the tie rod to be adjustable. This adjustment is used to set an alignment angle on a vehicle. Our Godspeed Tie Rods will provide you with 60% increased strength over stock. Additionally you will experience improved steering angle and response.

Tie Rod Ends

Godspeed Project Tie Rod Ends

Godspeed Project Tie Rod Ends

Are you in need of adjustable tie rod ends? Our Godspeed Tie Rod Ends allow for fine tuning the toe adjustment of your vehicle. The tie rod is a part of the steering mechanism in a vehicle. A tie rod consists of an inner and outer end. The tie rod transmits energy from the steering center link or rack gear to the steering knuckle. This will cause the wheel to turn. The outer tie rod end connects with an adjusting sleeve, which allows the length of the tie rod to be adjustable. This adjustment is used to set a vehicles alignment angle. Finally these Godspeed Tie Rod Ends also will give you ability to adjust the bump steer in hard cornering. In conclusion our tie rod ends provide smoother rod end movement allow for more stable transitions in drifting and autocross.